Filter
Top Products
1
Getting started
Handset layout
MEMORY
Press to access phone
numbers stored in the
memory.
Listening volume
Adjust the handset listening
volume to LO, MED, or HI.
PAUSE/REDIAL
When the handset is lifted, press
to redial the last number dialed.
When storing a number in the
memory or directory, press to
insert a 3-second pause in the
dialing sequence.
PROG
Press to store a phone number in
the memory.
M1, M2, M3
Press to dial a one-touch
number from the memory.
MUTE
Press and hold MUTE to silence
the microphone to prevent the
other party from hearing you,
but you will still be able to hear
the other party. Release MUTE
to return to the original two-
way conversation.
Switch hook
When held, the telephone is in
idle mode.
When released, the telephone is
ready to make a call.
OPTION
Press to display the setting
options.
While in the option menu, press
to save the selection and move
to the next feature.
FLASH
When there is a call waiting signal,
press FLASH to put the current
call on hold and connect to the
new call. Press FLASH again to
return to the original call. Also,
press FLASH to activate other
telephone company subscriber
services such as three-way calling.
IN USE
Flashes quickly when there is an
incoming call.
Flashes slowly when the
telephone line cord is not
plugged into a wall jack or
another telephone at the same
line is in use.
CALL LIST /
When the telephone is in idle
mode, press to display caller ID
information.
REMOVE
While viewing the call log,
press to delete entry currently
displayed, press and hold to
remove all entries.
CLEAR
Press to exit dialing, to exit storing
a number in memory, to exit the
call log, or to return to the idle
screen anytime without saving the
changes.
DISPLAY DIAL
Press to dial the number currently
displayed.