Filter
Top Products
17
DEVICE LIST
D1:Headset A
D2:Cell Phone A
Cell Phone B
BACK
OPTION
1
Bluetooth setup
Replace an active device
If you already have two active devices on the device list and
you want to activate a different device, you must deactivate
one of the two active devices.
To replace an active device:
Press MENU on the handset when it is not in use.
Press CID or DIR to highlight Bluetooth, then
press SELECT.
Press CID or DIR to highlight Device list, then
press SELECT.
Press
CID or DIR
to highlight the device you want to
activate, without a prefix D1: or D2:, then press OPTION.
Press CID or DIR to highlight Connect, then press
SELECT. The handset displays Only 2 devices can be ready
for connection and then a list of devices for deactivation.
Press CID or DIR to highlight the device to be
deactivated, then press NEXT. The handset displays Cell
Phone A is deactivated and you hear a confirmation
tone. The screen then displays Connecting Cell Phone B
to the base...
Depending on your cell phone settings, you may need to
press a key on your cell phone to confirm the connection.
When the new device is successfully activated and
connected, the handset displays Device connected. You
hear a confirmation tone.
Bluetooth connection from idle mode
When you have active devices that are not connected,
CONNECT appears on the idle handset. Press CONNECT
to start connecting an active device. When there are two
active devices, the handset will prompt you to choose one
before connection.
1.
2.
3.
4.
5.
6.
7.
BLUETOOTH
Add device
Device list
Download dir
BACK
SELECT
Connecting
Cell Phone B
to the base...
HANDSET
--:-- --/--
CONNECT MENU
1
1
DEACTIVATE
D1:Headset A
D2:Cell Phone A
BACK
NEXT
1
DEVICE LIST
D1:Cell Phone B
D2:Cell Phone A
Headset A
BACK
SELECT
1