AT&T SB67128 Telephone Accessories User Manual


 
7
Figure 5: Wall installation
Installation
NOTE: The power adapter is intended to be correctly oriented in a vertical or floorThe power adapter is intended to be correctly oriented in a vertical or floor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
6
If you want to install your repeater on a wall or other object, use the
provided screws. Professional assistance may be required to install
screws on the wall. Then plug the large end of the power adapter into
a nearby electrical wall outlet and raise the antennas.
Screw
holes
Screw spacing=2.5 inches
^
^