Filter
Top Products
Troubleshooting
My repeater
flashes slowly
again after
registration.
First try all the suggestions on the previous page.
Make sure the telephone base has power.
•
•
My repeater
cannot register
to my telephone
base.
First try all the suggestions on the previous
page.
Make sure your telephone base is model AT&T
SB67118 DECT 6.0 4-line corded/cordless
telephone system.
Carefully follow the registration instructions on
pages 3 of this user’s manual.
Make sure your telephone base is within 950
feet of the repeater. If registration does not
work, place the repeater next to the base and
try registering again.
•
•
•
•
I cannot
deregister my
repeater from
the previous
telephone base.
You can register a repeater to an SB67118
telephone base without deregistering it from
a previous telephone base. New registrations
overwrite any previous repeater registrations.
•
Power failure
recovery.
Your registered repeater automatically links to
the telephone base wherever power is restored.
The STATUS indicator light is on when there is
a valid link.
•
9