Filter
Top Products
Dial Code Features
You can use a Dial Code feature in either of two ways:
■
Press [Feature] followed by its 2-digit Dial Code (except Do
Not Disturb and Privacy).
■
Press a button programmed with the feature (see "Program-
Feature
Use
[Feature] [0] [2]
[Feature] [0] [3]
[Feature] [0] [4]
[Feature] [0] [5]
[Feature] [0] [6]
[Feature] [0] [8]
[Feature] [0] [9] + Ext. Number
[Feature]
[1] [0] + Ext. Number
[Intercom]
[6] + Ext. Number
[Intercom]
[6] [6]
[Intercom] [7] [0]
[Intercom] [7] [1]
[Intercom] [*] [7] [1]
Can use this feature only if
programmed onto a button
with lights (see page 4).
ming" on page 4).
Do Not
Disturb
Exclusive Hold
Recall
Save Number
Redial
Last Number
Redial
Conference
Drop
Privacy
Touch-Tone
Enable
Message
Light On
Message
Light Off
Call Pickup
Pickup Group
Loudspeaker
Paging
Group Calling
Group Paging
Prevents any calls from ringing at your phone.
Transferred calls return to sender and inside
calls get a busy signal. Outside callers hear the
usual ringing. Recommended only if someone
else answers your outside calls. To use this
feature, you must program [Feature]
[0] [1] on a
button with lights.
Places a call on hold so other extensions with
the line cannot pick it up.
"Recalls" a dial tone. If you are not on a PBX or
Centrex system, use Recall to end a call without
hanging up-you will get a dial tone and can then
make another call. Otherwise, use Recall to get
the PBX/Centrex dial tone.
Saves the last number you dialed into a tempo-
rary memory. Before you hang up on a busy or
non-answering call, press [Feature]
[0] [4] . Once
saved, you can radial it at any time by pressing
[Feature]
[0] [4] again. The number stays in the
memory until a different one is saved. System
Speed Dial numbers cannot be saved.
Redials the last number you dialed (except
System Speed Dial numbers).
Drops the last outside party added to a
conference call.
Prevents other people with the same line from
joining your calls. To use this feature, you must
program [Feature]
[0] [7] on a button with lights.
When on a rotary line, allows you to across
phone services such as “Bank-by-Phone” that
require you to dial digits. After you make the call
to the service and are asked to enter touch-tone
digits, turn on Touch-Tone Enable to change the
rest of the digits you dial to touch-tone.
Turns on the message Iight on another MLS
phone (you manually enter the extension).
Turns off the message light on another MLS
phone (you manually enter the extension).
Picks up a call ringing at any system extension.
Picks up an outside call ringing at any Pickup
Group extension.
Connects you to the (optional) loudspeaker
system.
Simultaneously rings all Calling Group
extensions; you connect to the first extension
that answers.
Simultaneously voice signals all Calling Group
extensions; you connect to the first extension
that answers.
5