Filter
Top Products
36
Answering System Operation
NOTE: If you pause for
more than 10 seconds dur-
ing remote access, you will hear a
help menu listing all features &
commands. If you issue no com-
mand for another 20 seconds, the
call will end automatically.
1.
Dial your telephone number from
any touch-tone phone.
2.
When system answers, enter your
two-digit remote access code (19
unless you have changed it).
3.
Enter remote commands
(see list at right).
4.
Hang up to end call and save all
undeleted messages.
Remote access
Use the remote access feature to check your messages
while you are away by calling your home phone num-
ber from any touch tone phone outside of your home.
When the answering system picks up, simply enter a
two digit security code to then access your messages.
This code is set at 19 by default; see page 32 to change
it.
Play all messages
1
Play new messages
2
Delete the message
3
33
Repeat or go back
4
Stop
5
Skip to next message
6
Review announcement
#7
Record announcement
*7to begin recording
5to stop recording
Record memo
8to begin recording
5to stop recording
Review remote access code
#9
Change remote access code
*9
Help menu
*5
Turn system off
0
Turn system on
0
If off, system will answer after 10 rings.
Enter your access code, then press 0 to
turn on.
Press to turn off answering system.
Incoming calls will no longer be
answered.
Press to hear list of features & com-
mands.
Press * 9 to change remote access
code, then enter desired remote access
code from 10-99.
Press # 9 to review remote access
code.
Press 8, wait for beep, then begin
speaking. Press 5 to stop recording.
Press * 7, wait for beep, then begin
speaking. Press 5 to stop recording and
listen to playback of new announcement.
Press to review current outgoing
announcement.
Press to stop any operation (stop play-
back, stop recording).
Press to skip current message and
advance to next message.
Press during the caller’s message to
repeat the message. Press during the
beginning of the day and time announce-
ment to go back to the previous mes-
sage.
Press during playback to delete current
message. Press 3 twice to delete all old
messages while it is in remote access
idle mode (message not playing back).
Press to listen to new messages.
Press to listen to all messages.