Filter
Top Products
32
Answering System Operation
1.
SETUP
3.
SETUP
Press until desired feature is
heard (see list at right).
Press until desired selection
is heard.
Press to set selection and
move to next menu option.
Press to set selection and
exit SETUP.
2.
CHANGE
(PLAY/STOP)
14
Or
NOTE: Press and hold CHANGE to
advance the remote access code
number by 10.
“Announcement. Press PLAY or
press RECORD. To continue setup,
press SETUP.”
Options: [record announcement]
“Remote access code. To change
the setting press CHANGE.”
Options: [enter 2-digit code] 19
“Message alert. To change the set-
ting press CHANGE.”
Options: On / Off
“Announcement only, record no
messages. To change the setting
press CHANGE.”
Options: On / Off
“Base ringer. To change the set-
ting press CHANGE.”
Options: On / Off
“Number of rings. To change the
setting press CHANGE.”
Options: 2 / 4 / 6 /Toll Saver
Press REC/MEMO to record your
outgoing announcement (see page 30).
Press STOP to stop recording.
Changing feature options
You can change how the answering system operates.
Press SETUP repeatedly to hear each feature. Press
CHANGE when you hear the feature you want to modify.
Feature options (Default settings underlined).
System announces: Feature description:
Choose number of rings before the system
answers a call. When Toll Saver is active,
the system answers after 2 rings if you have
new messages, and after 4 rings if you
have no new messages.
Choose this option to turn the base
ringer on or off (does not affect cordless
handset).
When on, callers hear an announcement
but cannot leave messages (see page 31).
When on, the telephone beeps every 10
seconds when you have new messages.
Enter a two-digit number (10-99) for remote
access from another phone (see page 36).
Disabling the message alert function temporarily
When the answering system is turned on (the ANSWER
ON/OFF light is lit) and the message alert function is
activated, any new incoming message will increase the
flashing number in the message window by one, and a
beep tone will sound every ten seconds as a reminder
that there are unreviewed messages on the answering
system.
To temporarily disable the message alert tone, press any
key (except ANSWER ON/OFF and HANDSET LOCATOR
keys) on the base. This turns off the audio message
alert tone but the number in the message window will
continue to flash as a reminder that there are unre-
viewed messages on the answering system. The mes-
sage alert tone will be re-activated with the next incom-
ing message.
To switch off the message alert tone for all incoming
messages, read the section on disabling the message
alert function on this page above.