Filter
Top Products
Administrator/Attendant Consoles for
Small Systems* in Administration Mode
1.
2.
3.
4.
5.
6.
T/P switch: Set to P when performing sysytem
administration.
7.
Adm Tel button: Used when assigning lines to
voice terminals and assigning voice terminals Dial
Access to Line Pools.
Adm Pool button: Used when setting up line pools.
Line buttons.
Auto Intercom buttons
(10 through 29).
Adm Misc button: Used when specifying Touch-
Tone or rotary signaling, assigning allowed-list call
restrictions, and administering other system options.
Call Rstr button: Used when setting lines to detect
a toll prefix or area code only and when assigning
outward and toll call restrictions.
8.
Message button: Used when giving a voice ter-
minal the same assignments as one that has already
been administered.
9.
Conference button: Used to assign features to in-
dividual voice terminals from the administrator/
attendant console.
* Systems with 8 or fewer lines and 20 or fewer voice
terminals — switch H on control unit is up
12