Filter
Top Products
11
Options while on calls
Volume control
While on a call, press DIR/VOLUME to increase or press CID/VOLUME to decrease
the listening volume.
note: The handset volume setting (1-5) and speakerphone volume setting (1-6) are independent.
Changing one does not affect the other.
Join a call in progress
If a handset is already on a call and you would like to join the call, press PHONE/
FLASH or /SPEAKER on another system handset.
To exit the call, press OFF/CANCEL or place the handset in the telephone base or
charger. The call does not end until all handsets hang up.
note: For models with 2 to 4 handsets, all handsets can be used at the same time on an
outside call. For models with five handsets, you can use a maximum of 4 handsets. If the fifth
handset attempts to join the call, the handset screen shows UNABLE TO CALL. TRY AGAIN.
Chain dialing
While on a call, you can initiate a dialing sequence from numbers stored in the directory,
caller ID history or redial list. Doing this can be useful if you wish to access other
numbers (such as bank account numbers or access codes).
To dial a number from the directory, caller ID history or redial list while on a call, access
the number through the menu system:
While on a call, to show the directory or call history, press MENU/SELECT, and scroll
to >DIRECTORY or >CALL LOG. Press MENU/SELECT.
-OR-
While on a call, press REDIAL/PAUSE to show the redial list.
Scroll to the desired number or use the dialing keys to find the desired directory
entry (see Search by name in the online user’s manual for more options).
Press MENU/SELECT. The selected number is dialed.
Redial
Each handset stores the 10 most recently called numbers in the redial list.
To review and call numbers in the redial list, press REDIAL/PAUSE in idle mode. The
most recently called number appears on the screen.
If it is not the desired number, press DIR, CID or REDIAL/PAUSE repeatedly to scroll
through the numbers in the list.
Once the desired number appears, press PHONE/FLASH or /SPEAKER to dial
the number. Or press OFF/CANCEL to exit the redial list.
1.
2.
3.
1.
2.
3.