Filter
Top Products
11
Getting started
11
Belt clip & optional headset
Install belt clip as shown below if desired.
Snap belt clip into notches on
the sides of handset.
Plug 2.5 mm headset
into the jack on the side
of handset (beneath
small rubber cap).
For hands-free telephone conversations, you can use any industry standard
2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm
headset.
To release belt clip from handset,
press on both flaps of the clip (as
shown). Pull and unlock one flap from
the notch first before detaching the
whole belt clip from handset.