Filter
Top Products
10
Getting started
10
Wall mounting
The base can be installed on any standard wallphone outlet as shown below.
Choose a location away from any electronic equipment, such as personal com-
puters, computer routers, television sets or microwave ovens. Avoid excessive
heat, cold, dust or moisture.
b
a
b
a
3) Plug power adapter into electrical
outlet.
4) Plug telephone line cord into an
telephone cord wall jack.
5) Position the wall mount bracket
over the wall outlet mounting pegs,
and press and slide the wall mount
bracket down firmly so it is held
securely on the outlet mounting
pegs.
1) Connect telephone line cord and AC
power cord to telephone jacks and wall
jacks, as shown on page 8.
2) Install wall mount bracket onto set.
First put the two front wall mount
bracket tabs into the front notches
on bottom of telephone base, then
squeeze the rear tabs of the wall
mount bracket as you insert them into
the rear notches on the bottom of
the telephone base.
NOTE: To disassemble the wall
mount bracket, squeeze the rear notch-
es while lifting up the wall mount
bracket back and away from the tele-
phone base.