AT&T E5912B Cordless Telephone User Manual


 
9
Telephone operation
Handset operation
Last number redial
Press REDIAL/PAUSE to display the
most recently called numbers (up to
32 digits). Press , or REDIAL/PAUSE
repeatedly to view up to five recently
called numbers. The handset will beep
twice at the beginning or end of the
list. Press OFF/CLEAR to exit.
Press PHONE/FLASH or SPEAKER
to redial any displayed number or press
PHONE/FLASH or SPEAKER then
REDIAL/PAUSE to call the most recently
called number (up to 32 digits).
Press MUTE/DELETE to delete the
displayed number from the redial memory.
555-1234
REDIAL
Handset locator
If you misplace the handset(s), press
HANDSET LOCATOR at the telephone
base. This starts the paging tone at the
handset(s) for 60 seconds to help you
locate the handset(s). To stop the paging
tone, press PHONE/FLASH, SPEAKER,
or any dial pad key (0-9, *, or #) on
the
handset(s), or press HANDSET
LOCATOR
on the telephone base.
NOTES:
1. The handset ringer volume also determines the
level of the paging tone. If the handset ringer
volume level is set to off (0), that handset will be
silenced for all calls and paging (see page 20).
2. During a page, if you press OFF/CLEAR or
MUTE/DELETE on a handset, the ringer of that
handset will be silenced. But the page will not
be cancelled.
TONE
DELETE
PAUSE
MUTE
REDIAL