Filter
Top Products
12
Telephone operation
Settings
Each cordless handset operates individually from
the other handsets. The ringer sound, ringer
volume, date & time, dial mode and language
must be programmed separately for each cord-
less handset. Follow the steps below to program
the cordless handset. To stop at any time, press
OFF/CLEAR.
Choose cordless handset ringer sound
1. Press MENU/SEL to begin programming.
2. Press CID or DIR until the screen displays
RINGER:
and the current setting.
3. Press MENU/SEL to change the current setting.
4. Press CID or DIR to display 1, 2, 3, 4 or OFF.
You will hear a sample of each ringer sound.
5. Press MENU/SEL to choose displayed ringer
sound and exit.
NOTE: If you choose OFF, the cordless handset ringer will
be turned off, and the screen will display RINGER OFF and
when the cordless handset is idle (not in use). If there are any
un-reviewed calls, the screen will display XX MISSED CALLS
instead of RINGER OFF and .
Set cordless handset display date and time
1. Press MENU/SEL to begin programming.
2. Press CID or DIR until the screen displays
DATE/TIME
.
3. Press MENU/SEL to view or set date and time.
4. Press CID or DIR to change the month in the
date and time line at the bottom of the display,
then press MENU/SEL.
5. Repeat step four to set day, hour, minute, and
AM/PM.
6. Press MENU/SEL to save selection and exit.
RINGER: 1
DATE/TIME
10:08 02/14
NOTES:
You can choose to set the
time manually, or you can
allow it to be set automati-
cally with incoming caller ID
information. The time will be
set automatically only if you
subscribe to caller ID service
provided by your local tele-
phone company (page 29).
Caller ID will not set the year.
1.
2.