Filter
Top Products
10
Getting started
Belt clip & optional headset
Install belt clip as shown (optional).
Plug 2.5 mm headset
into the jack on the side
of handset (beneath
small rubber flap).
NOTE: If the sound
quality of the headset is
poor, try unplugging it,
and firmly plugging it in
again.
Snap belt clip
into the notches
on both sides of
handset.
To release belt clip
from handset, lift one
side of the belt clip
out of the notch.
For hands-free telephone conversations, use any industry standard 2.5 mm headset
(purchased separately). For best results, use an AT&T 2.5 mm headset. To
order an AT&T 2.5 mm headset, visit our website at www.telephones.att.com
or call 1 (800) 222-3111; in Canada, call 1 (866) 288-4268.