Filter
Top Products
37
Caller ID operation
Use the following steps to store the telephone
number and name of a call history entry in the
directory.
When the telephone is idle, press CID/ to
enter the call history.
Press DIR/ or CID/ to scroll to the desired
caller ID entry.
Press MENU to store the displayed telephone
number in the directory. The screen shows
STORED to confirm the storage.
-OR-
If you need to add or remove the area code
or a 1 at the beginning of the number, do the
following:
Press SELECT and then CID/ or DIR/
continually to scroll through the various
dialing formats (area code + seven-digit
number, 1 + seven-digit number, seven-
digit number or 1 + area code + seven-digit
number).
Press MENU to store the displayed telephone
number in the directory. The screen shows
STORED to confirm the storage.
Press FLASH to return to idle mode.
NOTES:
If there is no number in the call history, when
you press MENU in step 3 above, the screen
shows NO NUMBER.
If there is no name in the call history, when
you press MENU in step 3 above, the screen
shows ENTER NAME. Enter the name using the
dialing keys and press SELECT to confirm your
selection. The screen shows STORED and the
telephone returns to caller ID review mode.
If the directory is full, the screen shows
MEMORY FULL and the telephone returns to
caller ID review mode.
1.
2.
3.
a.
b.
4.
•
•
•
Storing a call history entry in the
directory
NEW
05
No:
CHRISTINE SMITH
866-288-4268
12:00
AM
11-20
STORED