Filter
Top Products
17
Telephone settings
Menu setup
LOCL AREA CODE?
LAC 1-_ _ _
blinking
SET TIME/DATE
12:00
AM
11-20
Use the dialing keys to enter three digits of the
first local area code in LAC 1. Press REMOVE
to erase digits. Press SELECT repeatedly to
advance to the next local area code (LAC 2,
LAC 3 or LAC 4).
Press SELECT to save your setting and move
to the next option when you have finished
entering local area codes.
NOTE: If you do not need to program the local
area codes, press FLASH to exit. Then follow the
instructions in Set features on page 14 to set
other features.
Set date and time
When the telephone is idle, the screen shows the
date and time. The time can be set manually or by
incoming caller ID information (see How caller ID
works on page 33).
Press MENU, the screen displays SET TIME/DATE
and USE # FOR AM/PM alternatively.
Use the dialing keys (0 through 9) to set the
blinking digits. Use DIR/ or CID/ to move to
the previous or next digit.
For example, to enter the month of March, you
can enter 03 or 3.
Use # (pound key) to select between AM
and PM.
When the correct time and date (month-day)
are shown, press SELECT to save the new
setting and move to the next option.
2.
3.
1.
2.
3.
4.