Filter
Top Products
11
Getting started
Installation options
Wall mount to tabletop installation
To change the telephone base from the wall mount position to tabletop
position, follow the steps below.
Slide the telephone base upwards, then pull the telephone base away from
the wall and remove the studs.
1.
Unplug the telephone line cord from the telephone wall jack and the
telephone base. Untie the bundled telephone line cord. Remove the
telephone line cord from the slot on the bottom of the telephone base.
Lift the handset and place it aside. Hold down the switch hook on the
telephone base, then slide the handset tab upwards to remove it from the
slot. Rotate the handset tab 180 degrees. Push the handset tab down into
the grooves so it settles into position.
2.
3.
Switch hook
Handset tab