Filter
Top Products
1 4
Set Ti m e
The date and time are automatically set with incoming
call information. You can set the clock manually if you
wish.
¥
NOTE: After you replace the handset batteries
and base AC power, the date and time will be
reset to .
1 Press . The screen displays
2 Press or until the screen displays
3 Press . The screen displays
and the component to be changed blinks.
4 Use the keypad to enter the correct hour and
minutes setting. Then use or to switch
between and .
5 When the desired time is displayed,press
to save the new time setting.
AM
AM
AM
1412 2002.12.7 9:20 AM Page 14