Filter
Top Products
4 Check for dial tone.
After the batteries are charged, pick up the handset, press L, and
listen for a dial tone. Then press l. If you don’t hear a dial tone,see
“IN CASE OF DIFFICULTY.”
Wall Installation
1 Position the wall mount adapter on the base.
2 Connect the power cord to the phone.
Use only the power cord supplied with this product. If you
need a replacement, call 1 800 222-3111.
3 Connect the telephone line cord(s). See illustrations on previous
page for connections. Use the short line cord instead of a long line
cord for the connection to the L1/L1+L2 phone jack.
INSTALLATION
7
Align tabs on wall mount
adapter with holes on bottom
of base. Snap wall mount
adapter firmly into place.
Wall mount
adapter