Filter
Top Products
25
ANSWERING SYSTEM OPERATION
AT TOUCH TONE PHONE
Connect with the Answering System
You can access many features of this system remotely from a touch tone
phone.
1 Dial your telephone number.
2 When the system answers, press #, then enter your
Remote Access Code (preset to 19). The system beeps once.
3 Within two seconds, enter a remote command (see “Remote Access
Commands”).
4 Press *0to exit remote operation.
Voice Menu
The system has voice prompts to help you with remote operation. Press
*5to hear the menu while remotely connected to the answering system.
Remote Access Commands
Function: Command:
Play messages in Press #, then the appropriate mailbox
a mailbox number (1, 2,or 3). The system plays
new messages. If there are no new
messages, the system plays old messages.
Repeat a message Press #4while message is playing;
each press backs up another message.
Skip a message Press #6while message is playing;
each press advances another message.
Stop Press #5.
Save messages Hang up.
Delete message Press #9while message is playing.
Review announcement Press #7; system plays announcement,
then beeps.
Record announcement Press *7; after beep, record
announcement, press #5to stop.
System plays back announcement.
9371_book_1ATT 8/14/01 10:00 AM Page 25