Filter
Top Products
14
TELEPHONE MEMORY
AT THE HANDSET
4 When you finish entering the name, press s. The screen
displays ENTER NUMBER.
5 Enter the telephone number. Use < to backspace and make
a correction. Press r to store a pause in the dialing
sequence.
6 Press s or p to store your entry. You’ll hear a series
of beeps confirming the entry.
Note: When memory is full the screen displays MEMORY FULL, an error
tone sounds, and you will not be able to store a new number until you
delete a stored number.
Edit a Number Stored in the Directory
1 Press > (DIR). The screen displays DIRECTORY.
2 Press < or > to scroll alphabetically through numbers
stored in the directory
—OR—
Press the dial pad key for the first letter of the entry you
want to edit.
3 When the screen displays the number you want to edit, press s.
Then press > until EDIT flashes.
4 Press s. The screen displays the name and number. The flashing
cursor appears at the end of the name. Use <, > and the dial
pad keys to edit the name. Press s to move on to edit the
number.
5 Press s to save the edited information. You’ll hear a series of
beeps confirming the change.
DIAL
EEDDIITT
ERASE
9735550123
9371_book_1ATT 8/14/01 10:00 AM Page 14