Filter
Top Products
4
TELEPHONE OPERATION
Handset Volume
Adjust volume of what you hear
through the handset.
Make a Call
Press and wait for light to
go on steadily.
Flash/Call Waiting
Access special telephone company
subscriber services.
Answer a Call
Lift handset from base
— OR —
Press any key.
Change Channel
Press to switch to a
clearer channel.
Redial
Press P, then press
to call the last number dialed (up
to 16 digits).
End a Call
Place handset in base
— OR —
Press O.
Exit programming
without saving.
Cancel a page.
Temporary Tone Dialing
Press to change from dial pulse to
touch tone dialing during a call.
This is useful if you have dial pulse
(rotary) service and need to send
touch tone signals for access to
telephone banking or long-distance
services.
1 Dial the number.
2 Press *. Buttons pressed after
this send touch tone signals.
3 After you hang up, the phone
automatically returns to dial
pulse (rotary) service.
Headset Jack
You can use this telephone
hands-free when you install a
2.5 mm headset, included or
purchased separately.
Plug the headset into the jack
under the small rubber flap. Do
not force the connection, but
make sure the plug fits securely.
Handset Ringer Style/
Battery Save
Select from four different handset
ringer styles, or turn the ringer
off and extend battery life.
1 Make sure the handset is off.
2 Press G, #.
3 Press 1, 2, 3 or 4 to select
your ringer style (you will
hear a sample), or press 5
to turn the ringer off.
4 Press M.
When the ringer is off, select a
ringer style to turn it on again.