Filter
Top Products
Hold/Pause button For putting a call on hold. The Pause subfeature is not
supported by AT&T DEFINITY Communications System
Generic 1. (Pause can be programmed into an abbreviated
dial string by pressing "8" rather than pressing the Pause
button.)
Liquid Crystal Display
(LCD)
Available only on the 7315H and 7317H voice terminals, a
1-line, 16 character alphanumeric display, with the ability
to scroll to a second line, used as a clock, calendar, alarm,
and timer in Local mode, and used to display number
dialed, account code, and calling party ID in Normal mode.
Message button A fixed feature button, not supported by AT&T
DEFINITY Communications System Generic 1.
Message light A green light which goes on steadily when a message has
been left for you.
Microphone/Mic button A fixed feature which comes on automatically when an
internal automatic answer call is answered. It can also be
turned on or off manually.
Microphone light A green light which goes on steadily when the microphone
is activated.
Mode switch A sliding switch with 3 settings - test (T), operate ( ) and
program (P). To test your voice terminal’s ringer and
lights (and the alarm on display voice terminals), slide the
switch up away from you (T) - the ringer will sound and
the red and green lights will flash alternately until you
release the switch. (See your System Manager if either the
ringer or the lights do not respond during the test.) To
operate your voice terminal, slide the switch to the center
position ( ). The program mode (P) is not supported by
AT&T DEFINITY Communications System Generic 1.
Recall button A fixed feature button, not supported by AT&T
DEFINITY Communications System Generic 1.
Ringer volume control A sliding switch to control the volume for the tone ringer.
Slide it up away from you (Hi) for a louder ring, down
toward you (Lo) for a quieter ring.
Set button Available only on the 7315H and 7317H display voice
terminals, used with Timer Start/Fwd, Timer Stop/Rev and
Time/Timer Exit to set time related information on the
Liquid Crystal Display.
Speakerphone button A fixed feature button, with a single LED visual indicator,
for accessing the built-in speaker. Speakerphone goes on
automatically when an internal automatic answer call is
automatically answered.
Speakerphone light A green light which goes on steadily when the built-in
speaker is activated.
4