AT&T 7315H Answering Machine User Manual


 
To set the display clock Note: When your voice terminal is first powered up, or
when power to the voice terminal is interrupted,
12:00a Su 01-01 flashes on the display.
1 Press
Disp-Norm if you are in Normal mode,
otherwise start at step 2
Green light goes out
Local mode is activated, and time related
information is displayed
2 Press
Set until time, day and date information is
displayed
Time related information is displayed
Time (hh:mma/p) is flashing
3 Press
Timer/Fwd or
Timer/Rev until the correct
time appears
4 Press
Set to save the correct time and to display
the day
Day is flashing
5 Press
Timer/Fwd or
Timer/Rev until the correct day
appears
6
Press
Set to save the correct day and to display the
date (mm-dd)
Date is flashing
7 Press
Timer/Fwd or
Timer/Rev until the correct
date appears
8 Press
Set to save the correct date
9 Press
Time/Exit to save time, day and date
29