Filter
Top Products
Before You Install
1 Choose a location for the base near an electrical outlet and
a telephone jack.
This phone requires a modular telephone jack and a standard
electrical outlet (110v AC) not controlled by a wall switch.
2 Install the handset battery.
INSTALLATION
3
b) Align two holes in
plug with socket
pins, and snap the
plug into place.
d) Replace cover by sliding
it up into place.
a) Remove battery
compartment
cover by pressing
on the
indentation
and sliding
downward.
c) Place battery pack in compartment
with the wires in the lower left
corner,along the bottom of the
battery pack.
3 Attach the belt clip to the cordless handset (optional).
To attach To remove
6100_book_1ATT 11/25/00 12:37 PM Page 3