Filter
Top Products
Power Failure Recovery
If the system is disconnected from AC
power, the answering system will not
operate,but you will still be able to make
and receive calls. Your announcement and
messages are retained in memory during a
power failure,but you will need to reset
the clock when power is restored. See the
instructions on the bottom of the unit.
Message Window Displays
Clock needs to be reset.
Flashing – System is busy or in use
— OR —
Steady – System in Remote Access
mode.
Remote listening mode.
Deleting (rotating).
Memory is full
— OR —
Announcement monitor is off
(shown during Setup).
Call 1 800 222–3111.
5
IN CASE OF DIFFICULTY