Filter
Top Products
11
5 When you finish entering the name,press or .
The screen displays .
6 Enter the telephone number. Use to backspace and make
a correction. Press to store a pause in the dialing
sequence.
—OR—
Press to display the last number dialed from this
phone.
7 Press or to store your entry. The screen displays
and the current setting.
8 Press or to change the setting. Choose (for Yes) if you
wish the phone to alert you to calls from this number by changing
to a distinctive ringing pattern after the first ring. Choose (for
NO) for a normal ringing pattern.
9 Press or to confirm your selection. If you chose
in Step 8,a will be displayed with the directory entry.
Note: When memory is full the screen displays , an error
tone sounds, and you will not be able to store a new number until you
delete a stored number.
Edit a Number/Name Stored in Memory
1 Press . The screen displays .
2 Press the memory location key of the entry you wish to edit.
3 When the screen displays the number you want to edit,press
. Then press or until flashes.
4 Press . The screen displays the name and number. The
flashing cursor appears at the end of the name. Use , and
the dial pad keys to edit the name. Press to move on to
edit the number. Press to move on to edit the Distinctive
Ring setting.
5 Press to save the edited information.
TELEPHONE MEMORY
1430_book_2ATT-mk1(DEC21) 5/16/02 5:47 PM Page 11