Filter
Top Products
3 Charge the handset battery.
Place the handset in the base. Charge the battery for at least 12
hours the first time.
4 Check for dial tone.
After the batteries are charged,pick up the handset and press
; you should hear a dial tone.
5 Set the dial mode.
If you have touch tone service,the phone is ready to use as soon as
the batteries are charged.
If you have dial pulse (rotary) service, you’ll need to change the dial
mode.
• Press on the handset to enter programming mode.
• Press or until the screen displays and the
currently selected mode.
• Press . The current setting blinks.
• Press or to select or .
• Press , to save the displayed mode.
6 Set Time and Date.
• Press ,then press or until the screen
displays: . Press .
• The month is flashing. Press or until the screen displays
the correct month. Press .
• The day is flashing. Press or until the screen displays the
correct day. Press .
• The hour is flashing. Press or until the screen displays the
correct hour. Press .
• The minute is flashing. Press or until the screen displays
the correct minute. Press .
• or is flashing. Press or to choose between and
. Press .
¥
NOTE: You can choose to set the time manually, or you can
allow it to be automatically set with incoming Caller ID
Information.
5
91-5387-30-00_ATT1460_R1 2003.3.27 10:20 AM Page 5