Filter
Top Products
Logio User’s Manual, page 24
Changing Setup Options
You can change your master passcode, lost & found information, user IDs 1, 2, and
3, button tone volume, auto-off time, and contrast level by pushing the setup options
button when in “view” mode. When you push , Logio will take you through
all six of these setup options, much in the same way as when you initially did them.
But now you will have a choice of quickly skipping any of them by pushing . The
first screen will prompt:
After several seconds the screen will display:
Push if you want to skip to the next setup option (lost & found information). If
you want to change your master passcode, push and the screen will display:
The requirement to re-enter the old (current) master passcode is to prevent someone
from picking up your Logio while you are already logged into it and then changing
the master passcode so they can have access to it without worrying about it
automatically turning off and locking them out.
If you enter an incorrect old master passcode, the screen will display:
And then after several seconds it will display:
Changing Setup Options