Filter
Top Products
Section Section 33 Initial SetupInitial Setup
2323
3. Initial Setup
This section describes how to set up the LC for use with your machine tool. It’s
very important that the software and hardware are set up properly before you
attempt to operate the machine tool. Otherwise, the machine may behave in a
potentially dangerous manner. Please read through this section carefully to get a
good understanding of how the LC controls your machine.
Windows Setup
Since Anaheim Automation’s LC software is a real time control program, it must
have full control of the operating system while running. It is very important that
you do the following before running LC:
Disable all screen savers and power management programs.
Make sure there are no background programs running such as back-up
software and calendar reminders.
Make sure no other programs are open.
4 To Disable the Screen Saver
Windows 95, 98 or NT
1. Choose Settings, then Control Panel from the Start Menu.
2. Double-click the Display icon.
3. Select the Screen Saver tab.
4. Select “(None)” from the Screen Saver pull-down menu.
5. Choose the Apply button.
6. Choose OK to exit.
Windows 3.1
1. Double-click the Control Panel icon in the Main program group.
2. Double-click the Desktop icon.
3. Select “(None)” from the Screen Saver Name pull-down menu.
4. Choose OK to exit.
Section