Filter
Top Products
6.4 IF YOU FORGOT THE PASSWORD
Access the programming mode again and then:
l Press the Programming key followed by 0.
l Press the
*
key.
l 2 beeps are generated.
l Go on hook.
7. CONFIGURATION FOR PROFESSIONAL USE
If your TEMPORIS is connected directly to the public network, do not pay attention
to this chapter.
7.1 ACCESSING THE PROGRAMMING MODE
Your are offered 3 operations.For each of them, access the programming mode
again.
l Press keys 1 and 3 simultaneously.
l Go off hook.
l Release the keys.
7.2 TYPE OF DIALLING
l Press the programming key followed by 2.
For pulse dialling
l Press the key (or key)
l Go on hook.
For tone dialling
l Press the key (or key).
l Go on hook.
7.3 FLASH DURATION (R)
Access the programming mode again and then:
l Press the Programming key followed by 3.
l Press : 1 for a 80 ms flash,
2 for a 100 ms flash,
3 for a 180 ms flash,
4 for a 250 ms flash,
5 for a 300 ms flash,
6 for a 600 ms flash.
l Go on hook.
F
This last operation erases the WHOLE programming including
memories.
The password is 0000 again.
BEEP
BEEP
Tempori_22_uk.qxd 29/05/01 17:05 Page 7