Filter
Top Products
- 7 -
the illuminator
LED will light up.
Monitoring2-7
In the standby mode, press the door release button to display the video
images in order from entrance 1. Audio cannot be heard.
• The TONE OFF LED will light up.
1. It will take some time after pressing the door release button for the
screen to display, so please wait for the monitor screen to display
before performing the next button operation.
2. This function may not be operated due to the equipment being used.
At night, the illuminator LED lights up during an entrance station call. It
can also be made to light up at night when the entrance is being moni
tored.
1 If the call button of the entrance station is pressed, the illuminator
LED will light up.
2 When communication ends, the illuminator LED will go out.
1 Pressing the door release button will make the illuminator LED light
up.
2 When monitoring ends, the illuminator LED will go out.
When a call is made from the entrance station
When a surveillance camera is mounted in the common area
When monitori
ng is performed
Night illumination2-8
Press the security guard station call/light button during calling from the
entrance, communication with the entrance, or entrance monitoring to
switch to the video image of the surveillance camera. Press the button
again to return to the entrance video image.
During switching between the entrance camera and surveillance cam-
era in common area, the image on the monitor may become momen-
tarily distorted, but this is not a malfunction.
Switching of surveillance camera monitor in common area2-9
NOTES: 1. If there is an operation such as a call, monitoring ends and the call
operation begins.
2. Pick up the handset during monitoring to talk with the entrance
station being monitored.
3. Monitoring will automatically end after 30 seconds.
4. Monitoring will automatically end if monitoring the same entrance
is performed at another residential station.
NOTES: Distinguishing between day and night is automatically done by the en-
trance station.
Operation will vary depending on the entrance station setting.