Filter
Top Products
- 6 -
When the specified residence is called using Doctor call (automatic en-
try), the electric lock is automatically released without a door release op-
eration from the residential station.
This function may not be operated due to the equipment being used.
1 In the standby mode, press the security guard station call/light button.
Press the button once more to cancel the operation.
• When Doctor call function is set, the TONE OFF LED blinks every 2.5
seconds.
2 Press the call button of the entrance station to unlock a door without a
door release operation from the residential station.
3 The residential station for which the Doctor call function is set is
called. Lift the handset to respond if necessary.
Doctor call2-5
1 When the handset is picked up and the security guard station call/light
button is pressed, a call confirmation tone sounds.
• The TONE OFF LED will blink.
2 A tone will sound at the security guard station.
• The in use LED of the entrance station will light up.
Calling security guard stations2-6
Turning the entrance light on (when light is installed in common area)
1 Press the security guard station call/light button once during calling,
communication or monitoring to the entrance station.
2 The outside light at the entrance will only turn on for the preset dura-
tion of time.
Light control2-4
This function is not available if a surveillance camera is installed in
the common area.
NOTES: When Doctor call is enabled, the TONE OFF LED function cannot be
used. (It is possible to turn the call tone off.)
When calls are transferred to the security guard station, door release
with Doctor call is not possible.