Filter
Top Products
11
GETTING STARTED
SETTING THE PC MASTER STATION
Making preference settings
Make the preference settings on the Setting window as shown
below.
Select the [Preference 1] or [Preference 2] tab and make the
setting in the respective window. (See below for details about
the settings.)
■
Settings on [Preference 1]
Select the [Preference 1] tab in the Setting window.
1
Make the settings on this window.
2
[A] Event Action
Check the box for each item to activate the function
described below.
[Maximize Application]:
When there is a call from a station (even when
minimized), the PC master station is automatically
maximized.
[Balloon Notifi cation]:
When there is a call from a station etc., a Balloon
Notifi cation appears.
[Call Tone]:
When there is a call from a sub station, the call tone
sounds.
[B] Recording
Make the settings for the recording function.
[Directory of recorded video and audio]:
You can designate the directory in which recorded fi les
are stored.
[Max Recording Space]:
You can set the maximum recording space of the
application. Enter a value between "00.01" and "10.00"
GB as the Max Recording Space.
NOTE:
Recording cannot be done over the set Max Recording
Space. (No overwriting is performed.)
[Picture Recording Mode]:
You can select the image recording method from
"Snapshot" which only records one image from the
video door station, or "Video" which continuously
records images from the video door station.
NOTES:
You cannot make audio recordings when "Snapshot" is
•
selected.
When "Video" is selected and [Audio Recording] is set to
•
ON, sounds at the video door station are recorded while
communicating with the target station side during the auto
or manual recording.
[Auto Recording]:
Set whether or not to automatically record images of
the video door station when a call is received from the
video door station.
[Audio Recording]:
Set whether or not to make an audio recording.
To activate audio recording, be sure to set [Picture
*
Recording Mode] to "Video". You cannot make audio
recording when "Snapshot" is set.
When “Video” is selected at [Picture Recording
*
Mode] and [Audio Recording] is set ON, the sounds
from a sub station (door station or room sub station)
or master station can also be recorded while
communicating with the target station side during the
auto or manual recording.
Click
3
SAVE
to save the set contents and overwrite
the previous ones.
If you wish to cancel the set contents and restore the
*
previous ones, click
CANCEL
.
[A]
[B]