AEG C115 Telephone User Manual


 
10
UK
9.6 To switch between the handset and the speakerphone
tDuring a phone conversation through the handset press the speakerphone button
to speak
hands-free.
>The Speakerphone icon on the display and the speakerphone light next to the button will turn
on, but conversation remains through the handset until the handset is replaced on the base unit
cradle. While in speakerphone mode, lift the handset to enable a private conversation.
9.7 To mute the mouthpiece or microphone
During a call, you can mute the microphone or the mouthpiece so that the person on the other end
cannot hear you.
tPress the mute button
.
>While the microphone is muted, “MUTE” will flash in the lower right corner of the display, and the
mute icon
will also flash.
tPress the mute button
again to get back to the call.
9.8 LCD screen backlight
The display backlight will turn on for 15 seconds every time any button is pressed or when ringing is
received.
10 ONE TOUCH MEMORY
10.1 Store (M1, M2, M3) memory
tIn standby mode, key in the telephone number you wish to store, up to a maximum of 24 digits.
tPress the menu button
.
>The display shows “ENTER LOCATION”.
tPress the M1, M2, or M3 button to store the number in the selected memory.
10.2 Dial out stored number memory
tPress the M1, M2, or M3 button.
>The programmed memory number will be displayed.
tLift the handset or press the speakerphone button
.
>The phone automatically redials the number using handset or speakerphone mode selected.
11 OUTGOING CALL RECORD
11.1 Last number redial
tLift the handset or press the speakerphone button
.
tPress the redial button
.
>The phone automatically redials the last number you called.
Note:
tThis will not work straight after a mains power disconnection, but „Making a call from the outgoing
call record“ below will still be ok.
tDialled numbers are only saved in the last number redial memory if the number has started dialling
out.