7
Chapter 2 Using the Headset
Handling Calls
Once the Headset is successfully paired with a cellular phone, you can use it to
make and receive calls. If your cellular phone suppors voice dialing, you can per-
form this with the Headset.
Making Calls
There are two ways to make a call, using the Headset: keying in the number on the
cellular phone dial pad, or using voice dialing (if the cellular phone supports this
feature).
Using the Dial Pad
To use the dial pad on the cellular phone, dial the phone number. Once the call
is placed, the conversation will be carried by the Headset.
Using Voice Dialing
To use voice dialing, press the Large Buttone until a beep is heard. Say the name
of the person to be called. The call is placed.
Answering/Ending Calls
When an incoming call is received, a beep is heard, and the blue light will flash
quickly. To answer:
1. Press the Large Button.
2. If needed, adjust the volume. Press the Large Button to increase the volume;
press the Small Button to decrease the volume.
3. To end the call, press the Small Button for three seconds, or do nothing. After
10 seconds, the Headset will automatically disconnect.
If the Headset if powered off and an incoming call is received, press the Large
Button for three seconds to answer the call.
☞
Note:Due to the design of some cellular phones, the Headset
may auto-disconnect even if it is powered on, and will not beep
when receiving an incoming call. To reconnect the Headset to the
cellular phone, press the Large Button for one second.