Filter
Top Products
1424-EN/LZT 103 088 Uen D3 2010-11-16 18
DT690 D
ESCRIPTION
3.2.1 Soft keys
Figure 3: Soft keys “Call” and “List”
Note: The information displayed varies depending on the version and
configuration of the exchange, and whether you use the phone in
a DECT or an IP DECT system. Consult the system administrator
to find out which type of system your phone is used in.
Depending on the state and setting of your phone, different information
can be shown, see the following list:
• Idle phone
–Normal.
The display shows the programmed name of your network,
your name and extension number, time and date, and so on,
see figure 3 on page 18.
– Follow-me activated.
The display shows your own extension number followed by a
> and the number your extension has been diverted to.
Active area The next rows (Active area) are used for information
such as the name of the system to which the cordless
phone is connected. A user identity provided from the
system, or an owner ID, can also be displayed if it has
been configured in the Settings tab. This is also the
area for popup text, missed calls or to confirm an
action.
Soft key bar The bottom row (Soft key bar) is used for soft keys
which can be used as shortcuts for functions in the
phone. There are three soft keys located just beneath
the display. The function of each soft key is indicated
by text in the display just above the key, see figure 3 on
page 18. In idle mode, the soft keys can be used for
specific functions defined by the user of the phone.
Call
List
Soft keys