Filter
Top Products
1424-EN/LZT 103 088 Uen D3 2010-11-16 114
C
ONNECTIONS
19.4 Headset Profiles
In order to achieve optimal audio quality with the different headset types,
it is recommended that you select the corresponding profile. The default
setting is microphone on a boom, meaning that the audio is optimized for
using a headset with microphone on a boom.
To change the headset profile, do the following:
1. Press Menu, select , and press Select.
2. Select Headset and press Select
3. Select Mic on boom, Mic on cable or Hearing protection, and
press Select.
4. Press Back to save the setting.
If the pre-configured headset profiles do not match the headset in use,
or if the audio quality is low, it is possible to configure a new headset
profile. This is done in WinPDM or CPDM by the system administrator.