Filter
Top Products
2 9133i IP Phone User Guide
Introduction
Requirements
• A SIP-based IP PBX system or
network installed and running
with a number created for the
new 9133i IP phone.
• Adherence to SIP standard
RFC 3261.
• Access to a configuration server
where you can store the firm-
ware image and configuration
files.
The configuration server must
be able to accept connections
anonymously.
• The IP phone must be config-
ured for a specific type of proto-
col to use. (TFTP is enabled by
default). You can configure the
following protocols on the IP
phone:
- TFTP (Trivial File Transfer
Protocol)
- FTP (File Transfer Protocol)
- HTTP (Hypertext Transfer
Protocol)
• A 802.3 Ethernet/Fast Ethernet
LAN
• Category 5/5e straight through
cabling
• Power over Ethernet (PoE)
power supply (optional
accessory that is necessary only
if no inline power is provided on
the network).
Installation and Setup
If your system administrator has
not already setup your 9133i
phone, please refer to the Aastra
9133i Installation Guide for basic
installation and physical setup of
the 9133i. For more advanced
administration and configuration
information, system administrators
should refer to the Aastra SIP 480i/
480i CT/9112i/9133i IP Phone
Administration Guide