9
MX-ONE – Aastra 6739i
Aastra 6739i Quick Reference Guide
English
Settings in the Telephone
Shortcut Keys
Some shortcuts can be programmed by the user, while
others require administrator rights. The user shall
normally only program speed dial keys.
Do not program shortcut on softkeys 1-8, because these
keys may be overwritten by the system.
The figure below shows the key numbering which is
shown after pressing and then touch Softkeys:
The system administrator can program keys from key
number 9 and upwards with speed dial or monitoring
numbers. Check with the system administrator which
policy that is valid in the exchange in your company.
The shortcuts are shown as the softkeys on the sides of
the screen in idle mode.
Program a new
shortcut:
and then touch Softkeys
Touch the softkey to add. Available
softkeys are from key number 9 and
upwards
Set Type = Speeddial, enter the
label and the number
Edit a shortcut: and then touch Softkeys
Touch the softkey to edit
Delete shortcut: and then touch Softkeys
Touch the softkey to edit
Choose type None
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
...
Initiate a new
shortcut via the web
interface
Operation > Softkeys and XML
Available sofkeys are from key
number 9 and upwards
Set Type = Speeddial, enter the
label and the number
Edit shortcuts via the
web interface
Operation > Softkeys and XML
Edit the shortcut that you want to
change
Mute
Mute microphone
during call:
Press or softkey Mute
Silent ringing: Audio > Ring Tone >
Silent
Note: The ring signal is switched off permanently
Volume
Adjust the listening
volume of the:
- Handset
- Headset
- Ringer
- Hands-free
Press
Settings in the Telephone
Shortcut Keys(Continued)