Filter
Top Products
Operational, Basic, and Advanced Parameters
41-001160-00, Release 2.1, Rev 04 A-83
Configuration Parameters
Appendix A
Per-Line Settings
Parameter –
sip lineN autodial number
Autodial Number
(in Web UI)
Aastra Web UI Advanced Settings>LineN>Autodial Settings
Configuration Files aastra.cfg, <mac>.cfg
Description On a per-line basis, this parameter specifies the SIP phone number that
the IP phone autodials when the handset is lifted from the phone cradle.
Valid values can be:
-1 (Default) The phone uses the global
autodial setting for this line.
Blank (Empty field) Disables autodial on this line.
Valid SIP Number Dials the SIP number specified for this line.
Format Integer
Default Value -1
Range Any valid SIP number.
Examples sip line1 autodial number: 8500
Parameter –
sip lineN autodial timeout
AutoDial Timeout
(in Web UI)
Aastra Web UI Advanced Settings>LineN>Autodial Settings
Configuration Files aastra.cfg, <mac>.cfg
Description On a per-line basis, this parameter specifies the time, in seconds, that
the phone waits to dial a preconfigured number after the handset is
lifted from the IP phone cradle.
If this parameter is set to 0 (hotline), the phone immediately dials a
preconfigured number when you lift the handset. If this parameter is set
to a value greater than 0, the phone waits the specified number of
seconds before dialing the preconfigured number (warmline) when you
lift the handset.
Default is 0 (hotline).
Format Integer
Default Value 0
Range 0 to 120
Examples sip line1 autodial timeout: 30