Filter
Top Products
Programming the System
Performance Series
14
A value (On, Off) for each Call Station. Default = On. Off will mute music at
selected Call Station(s). This parameter is used to disable music at any Call
Station. This parameter is used to disable music or messages at any Call
Station.
A value (On, Off) for each Call Station. Default = On. Off will disable All
Call broadcasts at selected Call Station(s). This parameter could be useful for
disabling All Call broadcasts at a car wash or manager’s office Call Station.
A value (On, Off) for each Call Station or Station Selector. Default = On. Off
disables this Station Selector from connecting to specific Call Stations or
Station Selectors. This could be useful for making specific Call Stations and
Station Selectors inaccessible from this Station Selector, for privacy purposes.
This Station Selector will still be able to receive calls from other Call Stations
and Station Selectors.
Command to synchronize all Station Selectors with the data from the Station
Selector that issued the command. All data is synchronized with the exception
of Selector ID #, Silence Calls, and Registry.
This confirmation message follows the above. Station Selectors must be On
Line to be synchronized.
Read from Station Selector & Communications Controller. Station Selector
and Communications Controller software revision numbers.
16:Music {On }
S=xy: User Name
17: All Call {On }
S=xy: User Name
18:Registry {On }
S=xy: User Name
19:Sync All Data
‘ T A L K’ = Yes
Are You Sure ?
‘T A L K’ = Yes
20:Software Rev
Se=a.bc Con=x.yz