Filter
Top Products
2
INSTALLATION
This chapter describes how to install Intelligent Mirroring on the Primary
Server and the Secondary Server.
Overview Follow these instructions, in the order that they are given, when you
install and configure the servers.
1 Completely install the Primary Server before you begin to install the
Secondary Server. See the instructions in
Primary Server Installation, next.
After you have installed the Primary Server, the system reboots itself.
2 Verify that the Primary Server is operational and that you can place calls.
3 Install the Secondary Server. See the instructions in Secondary Server
Installation on page 20.
Primary Server
Installation
Follow the instructions in this section to completely install, configure, and
verify the Primary Server.
The device names of the network interfaces on your systems may vary
from those used in the following examples. To obtain a list of the device
names for your network interfaces, use the
ifconfig -a command.
Stopping System
Software
If any version of the Unified Messaging System software is running on
any of the machines in the configuration, you must perform these steps
on each machine:
1 Stop the application using this command:
/usr/app/gen/stopmon
2 Verify that the application is stopped using this command:
/usr/app/gen/hmm app
You should see no processes in the list.