7 Use four standard rack screws to attach the device to the rack. These screws are not
provided with the device.
Figure 11 V7111 24-PORT with Brackets for Rack Installation
Cabling the V7111 24-PORT
Figure 12 illustrates the rear panel of the V7111 24-PORT. For descriptions of the V7111 24-
PORT rear panel components, see
Table 6.
Cable your V7111 24-PORT according to each section of
Table 7.
Figure 12 V7111 24-PORT (FXS) Rear Panel Connectors
2 6 1 3 4 5
Table 6 V7111 24-PORT Rear Panel Component Descriptions
Item # Label Component Description
1 Protective earthing screw (mandatory for all installations).
100-250 V~
50 - 60 Hz 2A
2 AC power supply socket.
3 ANALOG LINES 1 –24 50-pin Telco for 1 to 24 analog lines.
Table 11
4 Data Cntrl Ready
LED indicators (described in
).
5 RS-232 9 pin RS-232 status port.
6 Eth 1 Eth 2 Dual 10/100 Base-TX Ethernet connections.
3Com VCX V7111 Analog Gateway Installation Guide 21
