3Com 8916 Two-Way Radio User Manual


 
39
SCREEN menu
SCREEN menu (continued)
Item Description
SOURCE NAME
Each input port for this projector can have a name applied to it.
(1)
Use the
▲/▼
buttons on the SCREEN menu to
select SOURCE NAME and press the
button.
The SOURCE NAME menu will be displayed.
(2) Use the ▲/▼ buttons on the SOURCE
NAME menu to select the port to be named
and press the ► button. Right side of the
menu is blank until a name is specied.
The SOURCE NAME dialog will be displayed.
(3)
The current name will be displayed on the
rst line. Use the
▲/▼/◄/►
buttons and the
ENTER or INPUT button to select and enter
characters. The RESET button can be used
to erase 1 character at a time. Also if you
move the cursor to DELETE or ALL CLEAR on
screen and push the ENTER or INPUT button,
1 character or all characters will be erased. The
name can be a maximum of 16 characters.
(4)
To change an already inserted character,
press the
button to move the cursor to the
rst line, and use the
◄/►
buttons to move
the cursor on the character to be changed.
After pressing the ENTER or INPUT button, the character is selected.
Then, follow the same procedure as described at the item (3) above.
(5) To nish entering text, move the cursor to the SAVE on screen
and press the ENTER or INPUT button. To revert to the previous
name without saving changes, move the cursor to the CANCEL on
screen and press the ENTER or INPUT button.
TEMPLATE
Using
▲/▼
buttons switches the mode for the template screen. The
selected template pattern can be displayed when the MY BUTTON
allocated to the TEMPLATE function is pressed
(
42).
DOT-LINE4
ó
DOT-LINE3
ó
DOT-LINE2
TEST PATTERN
ó
DOT-LINE1