56
The camera control is only available while the camera
image is displayed in single spot on the selected monitor
screen and the LOCK switch is in OFF position.
■ Camera Selection
1. Select an either spot or multiscreen monitor by pressing
the [SPOT] or [MULTISCREEN] button.
The indicator in the selected button is on.
2. Select the live camera mode (indicator off) by pressing
the [VCR/CAM] button.
3. Select a camera image you want control by pressing a
[1 – 16] button
The indicator in the selected button lights and the cam-
era image corresponding to the button appears on the
monitor screen.
■ Controlling Camera Site Accessories
For controlling camera site accessories, normally combina-
tion camera equipped with the specific feature or a speci-
fied receiver are required to utilize these functions.
● Lens Control
Confirm that the specified lens with power zoom/focus func-
tions is mounted on the camera.
1. Select the desired monitor and camera referring to the
Camera Selection procedure described above.
2. Press the [FOCUS NEAR/FAR] button to adjust the lens
focus to achieve a sharply focused image while observ-
ing the active monitor.
Pressing both of these buttons simultaneously will auto-
matically set the lens focus, if the specified camera with
auto focus feature is used.
3. Press the [ZOOM] button to adjust the lens zoom to
achieve the desired image while observing the active
monitor.
Press the [TELE] button to optically bring an object
closer.
Pressing the [WIDE] button has the reverse effect.
4. Press the [IRIS CLOSE/OPEN] buttons to close/open
the lens iris. Adjust the lens iris by pressing these but-
tons to obtain the proper image exposure.
Pressing these buttons at the same time will reset the
lens iris to the factory default setting.
● Pan/Tilt Control (Manual Operation)
1. Select the desired monitor and camera referring to the
Camera Selection procedure described above.
2. Press the Direction buttons to move the pan/tilt head in
the desired direction.
Pressing the D and B buttons will move the pan/tilt
head upwards and to the right.
Note: To move the pan/tilt head faster, press the
[HOME/SET] button while holding down the
Direction buttons.
CAMERA CONTROL FUNCTION
