49
Controlling the Multiscreen
Monitor
The operations described below are available on the multi-
screen monitor.
Note: We recommend using the spot monitor in single spot
for preventing image disturbance when displaying non-
interlace images.
■ Selecting the Multiscreen Monitor
1. Select the multiscreen monitor by pressing the [MULTI-
SCREEN] button repeatedly.
The indicator in the button is on to indicate the multi-
screen monitor is selected.
Note: The indicator in the button blinks to indicate the multi-
screen 2 monitor is selected, if applicable.
2. Press the [VCR/CAM] button will toggle the indicator in
the button on and off.
Off: Indicates camera images (Live Mode) is selected.
On: Indicates playback images (VCR Mode) is select-
ed.
3. In this condition, select the images to be displayed on
the monitor screen followed the procedure shown
below.
■ Controlling the Camera Images
While the VCR/CAM button is off, the camera images on the
monitor can be controlled followed the procedure
described below.
● Single Spot (Live)
1. Select an image to be displayed on the monitor by
pressing a [1 – 16] button.
The indicator in the selected button lights and the cam-
era image corresponding to the button appears on the
monitor screen.
2. To select another image, press a [1 – 16] button corre-
sponding to the image.
The selected image appears on the monitor screen.
The indicator in the button previously selected turns off
and the indicator in the button currently selected lights.
● Freezing Single Spot (Live)
While the image on the monitor screen is displayed in sin-
gle spot mode, the image can be frozen followed the pro-
cedure below.
1. Select an image to be frozen on the monitor by press-
ing a [1 – 16] button.
The indicator in the selected button lights and the cam-
era image corresponding to the button appears on the
monitor screen.
2. Press the [STILL] button to display the freeze image on
the monitor.
The indicator in the STILL button lights and the indicator
in the pressed CAMERA button starts to blink.
