q Operate Indicator (OPERATE)
Is lit while power is supplied to the System Controller.
w Lock Indicator (LOCK)
Is lit while operation of the System Controller and WJ-
FS616C is prohibited by the connected computer. The
lock can be released by sending a command from the
computer.
e Alarm Indicator (ALARM)
Blinks when an alarm is activated. Blinking changes to
steady light when the alarm is automatically reset.
To turn the indicator off, press the ALM RESET button.
r LED Display (UNIT CAMERA)
LED display allowing you to confirm the number of the
system unit and camera in operation. The CAMERA
section will display “–” when operating in multiscreen or
sequence mode.
t Iris buttons (IRIS, CLOSE/OPEN)
Close or open the lens iris of cameras equipped with
the specified lens.
When these buttons are pressed at the same time, the
lens iris is reset to the factory setting.
y Joystick Controller (UP/DOWN/L/R)
Used to operate the pan/tilt head manually, or to move
the cursor to the desired position in the setup menu of
the Video Multiplexer.
UP: Upward
DOWN: Downward
L: Left
R: Right
u Focus buttons (FOCUS, NEAR/FAR)
Adjust the lens focus of cameras equipped with the
specified lens.
i Zoom buttons (ZOOM, TELE/WIDE)
Zoom cameras equipped with the specified lens.
o Auto/Increment button (AUTO/+)
Activates the auto panning function.
During the setup, this button is used to select the
desired parameter in the setup menu.
