VQT4J81
20
20
Selecting the recording scene
This unit offers recommended recording settings for each recording scene. Selecting
the recording scene enables easy recording with the most appropriate settings.
• Press [STOP g/RETURN] to stop the unit.
1
Press [MENU] for
approx. 1 second
or more.
The screen to select
the recording scene is
displayed.
2
Press +, – to select the scene and
press [q OK] to enter.
If you select “USER”, skip the step
3
.
3
Press +, – to select “LOAD” and
press [q OK] to enter.
To exit the setting screen, press
[F2 (CLOSE)].
The selected recording
scene is displayed.
When [REC *] is pressed, recording is
performed with the selected recording scene
setting.
* If you select “USER” in step
2
, the state immediately before the recording scene was set is
restored, and the recording scene indication disappears.
* If you individually change settings such as the recording mode when the recording scene is set,
the settings o
verwrite the “USER” settings, and the recording scene indication disappears.
* The recording scene operates when microphone recording is used. Recording scene does not
oper
ate when another device is connected and the Mic/Line switch is set to [LINE] (➜ page 35).
* You can also set the recording scene by pressing [MENU] and selecting “SCENE SELECT” from
“MIC REC MENU”.
F2
REC *
STOP g/RETURN
MENU
