2. How to Use
17
Detailed operating instructions are on the CD-ROM.
2How to Use2Detailed operating instructions are on the CD-ROM.Printer
2.1 Printing from Windows
applications
You can print a file created in a Windows application. For
example, to print from WordPad, proceed as follows.
1 Open the document you want to print.
2 Select [Print...] from the [File] menu.
3 Select the unit’s name as the active printer.
4 Click [Print] or [OK].
L The unit will start printing.
Scanner
2.2 Scanning from the unit (Push
Scan)
You can easily scan the document by using the operation
panel on the unit.
2.2.1 Scan to Multi-Function Viewer
1
Set the original (page 13).
2 {Scan}
3 Press {V} or {^} repeatedly to select “VIEWER”. i
{Set}
4 For USB connection:
Press {V} or {^} repeatedly to select “USB HOST”.
i {Set}
For LAN connection:
Press {V} or {^} repeatedly to select the computer to
which you want to send the scanned image. i
{Set}
5 If necessary, change the scanning settings. Press
{>}, press {V} or {^} repeatedly to select the
desired setting. i {Set} i {Black}/{Colour}
2.3 Scanning from a computer
(Pull Scan)
2.3.1 Using Multi-Function scan
application
By clicking an application icon, the selected application
starts automatically after scanning.
1 Set the original (page 13).
2 Start Multi-Function Station. i [Scan]
3 Click the desired application icon.
Copy
2.4 Making a copy
2.4.1 Using the scanner glass
1
If the {Copy} light is OFF, turn it ON by pressing
{Copy}.
2 Set the original (page 13).
3 If necessary, change the resolution and contrast
according to the type of document.
4 If necessary, enter the number of copies (up to 99).
5 {Black}/{Colour}
L The unit will start copying.
6 After you finish copying, press {Stop} to reset the
settings you set in step 3 and 4.
2.4.2 Using the automatic document feeder
1
If the {Copy} light is OFF, turn it ON by pressing
{Copy}.
2 Set the original (page 14).
3 If necessary, change the resolution and contrast
according to the type of document.
4 If necessary, enter the number of copies (up to 99).
5 {Black}/{Colour}
L The unit will start copying.
6 After you finish copying, press {Stop} to reset the
settings you set in step 3 and 4.
Sending Faxes
2.5 Sending a fax manually
Important:
L You can only send faxes in monochrome.
2.5.1 Using the scanner glass
1
If the {Fax} light is OFF, turn it ON by pressing
{Fax}.
2 Set the original (page 13).
3 If necessary, change the resolution and contrast
according to the type of document.
4 Dial the fax number.
L To send a single page, skip to step 7.
L To send multiple pages, go to the next step.
5 Press {Quick Scan} to scan the document into
memory.
6 Place the next page on the scanner glass. i {Set}
L To send more pages, repeat this step.
7 {Black}
MC6020CX-PNQW1390ZA-QRG-en.book Page 17 Thursday, July 17, 2008 9:42 AM
